Skip to content

What Is a Stablecoin? How a Dollar-Pegged Token Works, and Where the Peg Can Break

Share
Smoked-glass panel with a mint reference line and a bar drifting below it, orange glow in the gap, headline PEG IS A PROMISE

A stablecoin is a crypto token designed to hold a steady value against a reference asset, usually the US dollar. It lives on a blockchain like any other token, so you can send it, keep it in a wallet and post it as margin. What makes it a stablecoin is the promise attached to it: each token should stay worth a dollar.

The important word is "designed". A stablecoin does not keep its value by itself. Something holds it there. That can be reserves, collateral or a set of rules.

If you trade perps, that something matters, because the stablecoin can be the unit your margin, your profit and your losses are counted in.

This piece explains how a stablecoin works, the main ways to build one, what "the peg" means and where it can break. It does not rank coins or tell you which one to hold. The goal is simpler: that you can look at any stablecoin's setup and know which questions to ask.

Key Takeaways

  • A stablecoin is a token designed to track a reference value, usually the US dollar; the design behind it does the holding, not the token.
  • Reserve-backed, crypto-collateralized and algorithmic stablecoins hold their peg in different ways and fail in different ways.
  • The peg holds while someone can swap the token back for a dollar's worth of assets and has a reason to do it.
  • When a token loses its peg, a balance counted in that token keeps its number but loses dollar value.
  • You can check a stablecoin yourself through its reserve reports, its redemption terms and its supply on-chain.

What a Stablecoin Is

Volatile coins float. Their price is whatever the market pays today. A stablecoin tries to do the opposite: keep its price pinned to an outside value, so that a token you hold today buys the same next month.

That outside value is the reference asset, and the relationship the coin promises to keep with it is the peg. This article sticks to dollar pegs. The same logic applies to a token that tracks a euro or a commodity.

On-chain, a stablecoin is a smart contract that keeps a ledger of balances. The contract can create new tokens, called minting, and remove tokens, called burning. Who may mint and burn, and against what, is the whole design. Who mints, against what, is everything. Every safeguard and every weak point sits somewhere in that answer.

That gives you a useful first test for any stablecoin. Start there. Ask what has to happen for a new token to exist. Then ask what you get back when a token is destroyed. Each design below is a different answer to those questions.

Why Perp Venues and Payouts Settle in a Stablecoin

A perpetual contract needs a unit to count in. Your margin, your unrealized profit and loss, your funding payments and your fees all have to be stated in something. If that unit were the coin you are trading, every figure on your screen would move twice: once with your position and once with the unit itself.

A dollar-pegged stablecoin removes the second move. When a venue settles a perp in a stablecoin, margin, profit and loss and withdrawals all sit in a single unit that is meant to stay still. A gain shows up as a gain, without a second price to subtract. Our guide to long vs. short positions walks through how profit and loss add up on a stablecoin-settled perp.

There is a second reason, and it is the on-chain one. A stablecoin moves like any other token. A deposit, a margin transfer or a payout can be a transaction you look up yourself, not a bank entry you take on trust.

The trade-off sits in the word "meant". Settling in a stablecoin swaps the swings of the traded coin for a quieter risk: the unit itself can stop being worth a dollar. The unit of account carries risk too. It is easy to overlook, because on a normal day it does not show.

How a Stablecoin Is Built: Reserves, Collateral or Code

Designs differ in what stands behind each token. The families below are the basic types, and a real design can mix them.

Backed by Reserves

An issuer holds assets off-chain, such as cash or short-dated bonds held at banks and custodians, and issues tokens against them. When you hold the coin, you are relying on the issuer at every step.

The reserves have to exist, be worth what is reported and be kept apart from the issuer's own money. And someone has to be able to hand tokens back and receive dollars. The peg rests on that redemption promise.

The strength of this design is that the backing is plain money or something close to it. The weakness is that all of it sits off-chain, with an issuer, its banks and its custodians. You see it only through what they publish.

Backed by Crypto Collateral

Here users lock crypto assets in a smart contract and mint stablecoins against them, for less than the collateral is worth. That cushion is called overcollateralization. If the collateral's value falls toward the debt it secures, the contract liquidates the position: it sells collateral to repay the stablecoins.

You rely on the contract code, on the price feeds (oracles) that tell the contract what the collateral is worth, and on liquidations that still work when markets move fast. The backing sits on-chain, where you can read it. The weak point is a sudden drop in the collateral, or a price feed that reports the wrong value.

Algorithmic

An algorithmic design has no full outside backing. Rules expand the supply when the price is above target and reduce it when the price is below. A design can add a second token that absorbs the swings: it is created or destroyed to pull the stablecoin back to its target.

This holds as long as demand and confidence hold. When they go, there may be nothing outside the system to sell. Defending the peg by issuing more of the second token pushes that token's price down, which weakens the defense further.

DesignWhat backs each coinWhat you rely on
Reserve-backedCash and similar assets held off-chain by an issuerThe issuer, its custodians and its redemption process
Crypto-collateralizedCrypto locked in a smart contract, worth more than the stablecoins issuedThe contract, its price feeds and working liquidations
AlgorithmicRules that expand and reduce supplyContinued demand for the coin and its system

What "the Peg" Means and How It Holds

The peg is the target price. The market price is what the coin actually trades at on exchanges. They can differ. Two forces keep them close: redemption and arbitrage.

If the stablecoin trades below its target, anyone who can redeem has a reason to buy it cheap and hand it to the issuer for a full dollar. That lifts the price.

If the stablecoin trades above target, anyone who can mint has a reason to deposit a dollar, receive a newly minted coin and sell it at the higher price. That pulls it down. In a crypto-collateralized design, a stablecoin below target lets borrowers repay their debt at a discount, which adds demand.

That mechanism has two conditions you should not skip. The arbitrage works only for those who are allowed to redeem. And it works only while they expect the redemption to complete. If either fails, nobody closes the gap. The discount stays.

A token trading a little away from its target is not a broken peg. That small gap is the cost of moving between the token and the dollar: fees, waiting time, the effort of redeeming. A peg is breaking when the gap keeps widening and the trade that should close it stops happening. A wide gap that stays is the warning.

Where the Peg Can Break

Every design rests on something outside the token. The peg breaks where that something fails. These are the usual places to look:

  • Reserve quality. Reserves worth less than reported, or hard to sell fast, cannot cover redemptions in full.
  • Reserve access. Sound assets can still be out of reach in time: a frozen bank account, a weekend, a holding that has to be sold first.
  • Redemption limits. If only approved customers can redeem, with minimums, fees or days of processing, the arbitrage that holds the peg is narrower than it looks.
  • Confidence and runs. Doubt makes holders sell, selling widens the gap, and a wider gap feeds the doubt. Early redemptions can drain the reserves that later holders count on.
  • Collateral and price feeds. A collateralized design can end up with debt larger than its collateral if prices gap down faster than liquidations run, or if a price feed reports a wrong value.
  • Contract and admin powers. A bug can mint tokens that nothing backs. An admin key that can pause transfers or freeze addresses is a power you rely on not being misused or stolen.
  • Legal and custody structure. Reserves held through third parties depend on contracts and account structures, and on how they would be treated if the issuer failed.

For a trader, a depeg shows up in a specific way. Your margin, your profit and loss and your withdrawals are counted in tokens. The venue's books can be correct to the cent while the stablecoin itself trades below a dollar. Your account shows the same number, but what that number buys outside the venue has dropped. Same number. Less money.

That applies to margin you have posted, to unrealized gains and to a withdrawal on its way to your wallet. It is a separate risk from the venue and from your own positions, and it sits under all of them.

What You Can Check Yourself

You do not have to take a stablecoin's stability on faith. No special access needed.

  • Read the reserve report. Note the date of the snapshot, who prepared it, what kind of check it is and what the reserves are made of. A report is a picture of a single moment, not a promise about the next.
  • Compare the supply on-chain. The token contract shows its total supply. Compare it with the reported reserves at the same date, and remember that a stablecoin deployed on several chains has a supply on each.
  • Read the redemption terms. Who can redeem, from what amount, at what fee and how fast? What can the issuer change or pause?
  • Look at the admin controls. Can the contract be paused, upgraded or used to freeze addresses, and who holds those keys?

For a collateralized design, the collateral and its ratio to the debt sit on-chain, so you can read them directly instead of waiting for a report. Our guide to what a proof of reserves does and doesn't prove explains why a reserve snapshot is a starting point, not an answer. And if reading a token contract is new to you, our piece on how to use a block explorer shows how to read contract calls, transactions and addresses.

What This Means for Payouts at an On-Chain Prop Firm

When a prop firm pays out on-chain, the token it pays in is part of what you rely on. The payout itself and the token behind it are separate questions. Two questions, two places.

A payout transaction shows that tokens reached a wallet. It does not tell you what backs the coins you received. The checks in the previous section do. CarrotFunding's transparency and on-chain proofs documentation lists the wallets and smart contracts behind the platform. Reading the payout side and the token side together is what turns "paid on-chain" into something you have checked.

Conclusion

A stablecoin is stable only under a condition: someone must be able to swap it back for dollars, and enough holders must believe that path stays open. Remove either part and "stable" becomes a market price like any other. That is why the useful question is not whether a token is at a dollar today. It is what would have to happen for it to stop being there, and whether you could see that coming from the reports, the redemption terms and the supply on-chain. If you can't answer that for the token your margin sits in, that is the first thing to check.

FAQ

Is a stablecoin the same as a dollar in a bank account?

No. A dollar in a bank account is a claim on that bank, held inside the banking system. A stablecoin is a token on a blockchain whose value depends on how it is built: on assets an issuer holds, on collateral locked in a contract or on rules. Holding it means relying on that design and on your ability to swap it back.

What happens to my open positions if the settlement token loses its peg?

That depends on how the venue treats the token. If the venue counts everything in that token, your positions, margin and liquidation levels keep running in token terms, and the depeg does not show on your screen. It shows when you compare your balance with the dollar, or when you withdraw and use the tokens elsewhere. Read how your venue values the assets it accepts as margin.

How can I tell whether a reserve report is an audit or an attestation?

Read the accountant's statement at the top of the report, not the issuer's summary. An attestation checks specific figures, usually the reserve balance at a stated date, against agreed procedures. An audit examines the financial statements as a whole and gives an opinion on them. Both look backward, and neither covers what happens after the date on the report.

Is an overcollateralized stablecoin safer than a reserve-backed one?

Neither design removes risk; each moves it somewhere else. A collateralized stablecoin depends on code, price feeds and liquidations working under stress. A reserve-backed token depends on an issuer, its banks and its redemption process. The more useful question is which risk you can check better yourself: collateral you can read on-chain, or reserves you see only through reports.

Is a stablecoin on a second chain the same as the original?

Not necessarily. An issuer can deploy its own contract on several chains, each with its own supply. A bridged version is something else: a token on the second chain that stands for original tokens locked in a bridge contract. It carries the bridge's risk on top of the stablecoin's own. Check which contract address you hold and who issued it.

Contents
Topics

92 articles in total

Ready to trade with our capital?

Pass the evaluation and trade funded on a prop firm built by traders, for traders.

Get Funded

More Insights

Education

What Is MEV? Who Sees Your Transaction Before It Lands

MEV is the value someone can earn by choosing the order of transactions before they land in a block. Here is where your transaction waits, how front-running, sandwiches and back-running work, what changes between pools and order books, and why a public order is not the same as a fair one.

9 min read